Blog Layout

Common Commercial Roofing Problems for Florida Businesses

Floyd Mason • Jul 14, 2023

Florida businesses need to be aware of the common commercial roofing problems they may encounter in order to protect their investments. The state’s humid and wet climate can drastically affect the integrity of a commercial roof, leading to leaking, standing water, mildew, and mold growth, as well as decreased energy efficiency due to poor insulation. Heat and intense storms can damage a roof over time, making timely maintenance and repair essential.

Common commercial roofing problems in Florida include:

Leaks – Water leaking from the roof is one of the most common issues with commercial roofs. It is important to have any leaks identified and fixed right away as they can cause further damage to the roof and interior of the building and compromise its structural integrity.

Damaged flashing – Flashing is used to seal the joints between different areas of the roof, such as at the edge of a chimney or around vents. If this flashing becomes damaged, it can sometimes lead to leaks. The Florida sun can cause the flashing to wear, which can cause flashing seals to go bad and lead to broken or loose shingles.

Cracked sealant – Sealants are used to seal the joints and seams on a roof. Over time, they can become cracked due to exposure to sun, wind, and rain. This can allow water to enter through the cracks, leading to further damage.

Poor Insulation – Without adequate insulation, heat can easily transfer through the roof, leading to increased energy costs and a decrease in interior comfort. Proper insulation should be inspected regularly to ensure it is still providing optimal protection.

Structural Damage – Florida’s strong storms can take a toll on commercial roofs, leaving them with holes, missing shingles or tiles, and other structural damage. This should be inspected and repaired as soon as possible to ensure the roof is still functioning adequately.

Poor Installation – Poorly installed commercial roofs can lead to a host of problems. When installing a commercial roof, it is important to ensure that the correct materials are used and that the installation is done properly in order to maximize its life span and performance.

Signs Your Commercial Roof is Damaged

It is important to be aware of the signs that may indicate your commercial roof is damaged. These include:

Sagging or uneven areas on the roof
Stains on the ceiling or walls
Leaks or water spots in different places
Crumbling, cracking, blistering, or peeling sealant
Visible damage to shingles, such as cracked or missing ones
Increased energy bills due to inadequate insulation.

If you notice any of these signs, it is important to speak with a professional roofing contractor at ACR1 right away in order to assess the damage and repair it before it gets worse. Taking timely action can save you time and money in the long run.

Commercial Roofing Services in Florida

By being aware of the common commercial roofing problems in Florida, businesses can take precautions to protect their investments. It is important to inspect roofs regularly for signs of wear or storm damage and repair any issues that are discovered. Having an experienced commercial roofing specialist, like ACR1, take care of any needed repairs or maintenance will ensure the roof is functioning properly and protect your business from costly repairs down the road.

< Older Post Newer Post >

Author: Floyd Mason

Born and raised in farming in Iowa

Worked in and around construction since 1977

BS in Corporate Finance and Financial & Estate Planning from Brigham Young University. Involved in Boy Scouts of America for more than 35 years, Scoutmaster 15 years Estimator, Project Manager, Sales Representative, Crew Leader, Laborer, Territory Manager, District Manager, Regional Manager, National Sales Manager,

ACR1.COM Sales & Marketing Manager since 2013.

Best Roofing Practices for Mines and Mineral Plants -

Roofing for Extreme Conditions: Best Practices for Mines and Mineral Plants

26 Mar, 2024

Don't let harsh conditions affect the longevity of your roofing system. Learn the best practices for protecting mines, mineral plants, and other industrial facilities from ACR1 Commercial Roofing.

The Future is Here: Monolithic Roofing Systems Explained

26 Mar, 2024

Upgrade your commercial building with the latest monolithic roofing systems. Discover the benefits and how they can protect your property for years to come with ACR1 Commercial Roofing.

How do Flat Roofs Drain?

13 Feb, 2024

Flat roofs can be a great choice for buildings due to their affordability and durability. However, if not done correctly, flat roofs are prone to water damage. Proper drainage is essential for the longevity of a flat roof, and selecting the correct drainage system is critical. Here we will discuss three common flat roof drainage systems - gutters, interior drains, and scuppers - as well as their pros and cons. Gutters Gutters are the most common form of flat roof drainage because they are low-cost and efficient when it comes to redirecting water off the roof. Gutters should be installed at a certain angle (approximately 1/4” per foot) to ensure proper water drainage. Gutters also need to be maintained over the years, as debris and leaves from storms or rain water can clog them up and create standing water. Pros: Low-cost installation and maintenance Easy to install Can direct water away from the foundation of the building Cons: Prone to clogging Requires periodic maintenance and cleaning Overflow from rain storms can cause damage to surrounding areas Interior Drains Interior drains are often seen as the higher-cost alternative to gutters. They are installed directly into the flat roof’s membrane and include a network of pipes that drain water off the roof into a downspout. Pros: Low maintenance More reliable than gutters in terms of preventing roofing damage Can be adjusted to fit any size of flat roof Cons: Expensive installation and maintenance costs compared to gutters May require frequent adjustments depending on the environment surrounding the building Can be difficult to install if the roof does not have the right slope Scuppers Scuppers are metal or plastic openings that allow water to drain off flat roofs. They generally come in square or rectangular shapes and are installed along the perimeter of a roof. The size and shape of scuppers should be adjusted accordingly in order to prevent water from overflowing onto the sides of a building. Pros: Easy and cost-effective installation Low maintenance costs compared to gutters or interior drains Can be adjusted to fit any size of flat roof Cons: Prone to clogging due to debris and leaves Overflow from rainstorms can cause damage to surrounding areas Can be difficult to install correctly if the roof does not have the right slope When it comes to selecting the best drainage system for your flat roof, there are a few things to consider. Gutters, interior drains, and scuppers all offer their own advantages and disadvantages. It is important to select the right drainage system for your needs in order to ensure the longevity of your roof and protect it from water damage. Flat Roof Repair and Inspection Services If you are looking to repair or replace your flat roof, make sure to contact a certified roofing professional who can assess your current roof and provide the best solution for your needs. At ACR1 Commercial Roofing, we specialize in flat roof repair and installation . Our team of certified professionals has years of experience working with flat roofs, so you can be sure that your roof is in safe hands. Contact us today to learn more!

How Do Flat Roofs Handle Rain?

13 Feb, 2024

Learn about the unique challenges and solutions for flat roofs when it comes to handling rain, and how ACR1 can provide expert commercial roofing services for your building.

How do Flat Roofs Drain?

By FLOYD MASON • 11 Sep, 2023

Flat roofs can be a popular choice for homes and commercial buildings, but they must be maintained and managed correctly to ensure that rainwater doesn’t cause damage or unwanted leaks. That’s why it’s important to understand the components of a flat roof drainage system and how they work together.